当前位置:首页 > 技术支持 > IICHIB-C1-En > 正文内容

SFP optical transceiver reads the firmware

The hardware device in this demonstration is 1.25G-SFP-SX

All SFP packaged fiber modules can be used for reference

After the software opens, log in.

Perform the following steps:

1) Select SFP Tab

2) Page size, set to :8(This value is usually 8, but there are exceptions that vary depending on the IC. If reading fails, consult the module vendor)

3) Set the IIC read rate to :1(This value is filled in according to the usage, the smaller the value, the faster the larger the slower, we have tried to fill in 0)

4) Select the firmware address section that you want to read(SFP can usually be selected all, unless there is no DDM fiber module)

Note: To save the firmware locally, you must check "A0L"

5) If multiple optical fiber modules are read, select "Auto". Then click on "Read".

3.png

6) If the read was successful, the "log" field will display "Read success"(If the read fails, watch another video)

7) If "Local Save" is checked, the firmware will be saved to the specified location, see the "Description.txt" file in the software root directory for the location

8) The read firmware content is displayed in the HEX control(Or view it with another third professional HEX editor)

5.png

3 2 READ SFP.png6.png


扫描二维码推送至手机访问。

版权声明:本文由IICHIB发布,如需转载请注明出处(如有版权异议,请联系我们)。

严禁使用IICHIB所有设备及相关程序从事任何非法活动.

违法和不良信息举报中心.

本文链接:https://iichib.com/post/58.html

分享给朋友:

“SFP optical transceiver reads the firmware” 的相关文章

XFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

XFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

The hardware device in this demonstration is 10G-XFP-SRAll XFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber module...

SFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

SFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

The hardware device in this demonstration is 1.25G-SFP-SXAll SFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber modu...

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve Password: Go through a series of steps or verification methods to get a lost or forgotten password.How did this feature come about? I have a...

SFP optical module (Writing firmware  information tutorial)

SFP optical module (Writing firmware information tutorial)

The hardware device in this demonstration is 1.25G-SFP-SXAll SFP packaged fiber modules can be used for referenceAfter the software opens, log in.Perf...

Firmware Template - Toolkits[Creating Optical Module Firmware File Template]

Firmware Template - Toolkits[Creating Optical Module Firmware File Template]

1) The template needs to be prepared in advance and stored in the corresponding folder, otherwise this function cannot be used quickly. (Template fold...